How To Fix A Suorin Air

So, your trusty Suorin Air vape pen's acting up, huh? Don't stress, we've all been there. It's like your favorite pair of jeans - it's bound to get a bit worn out after a while. But don't you worry, we're gonna fix this baby up in no time. Grab your screwdriver, 'cause we're diving in!

First Things First: Safety First!

Before we start, let's make sure our workspace is safe. Turn off and unplug your Suorin Air, and let it cool down for a bit. We don't want any steamy surprises, do we?

Gather Your Tools

You'll need a small Phillips #00 screwdriver, some rubbing alcohol, and a few cotton swabs. Oh, and don't forget your trusty tweezers - they're gonna be our little helper today!

Let's Get This Party Started

Alright, now that we're all set up, let's get this show on the road. First things first, we need to get into that bad boy. Flip your Suorin Air over and find the three tiny screws on the bottom. Unscrew them, but be careful - these little guys are tiny, and we don't want them disappearing on us!

Once you've got those screws out, gently pry open the case with your screwdriver. It might take a bit of wiggling, but don't force it - we don't want to break anything. And there you have it - the insides of your Suorin Air are revealed like a magic trick!

Cleaning Time!

Now that we're in, let's give this thing a good clean. Grab your rubbing alcohol and cotton swabs, and gently wipe down the contacts and the battery. Be careful not to get any alcohol on the circuit board - we don't want any short circuits happening!

While you're at it, give the coil a quick clean too. Just gently wipe it down with a dry cotton swab. If it's looking a bit worse for wear, it might be time for a replacement. But we'll get to that later!

Time for a Coil Check

Alright, let's talk coils. If your Suorin Air's been acting up, it might be time for a new coil. Grab your tweezers and carefully pull out the old one. It should pop out with a bit of a tug. If it's not budging, don't force it - you might break something.

Once you've got the old coil out, grab your new one and pop it in place. Make sure it's pushed in all the way - you should hear a little click when it's in properly.

How To Fix Blinking Blue Light On Suorin Air | Ralnosulwe

Prime Time!

Before we put everything back together, let's prime that new coil. Drip a few drops of e-liquid onto the cotton, and let it soak in for a bit. This helps to ensure that your coil's ready to go as soon as you start vaping.

Putting It All Back Together

Alright, we're almost done! Grab your screwdriver and gently put the case back together. Make sure everything's lined up properly, and then screw those tiny screws back in. Tighten them up, but not too tight - we don't want to strip them!

Once you've got everything screwed back in, give your Suorin Air a quick wipe down with a damp cloth. No one likes a dirty vape pen, right?

Let's Test This Baby Out!

Alright, the moment of truth! Plug in your Suorin Air and let it charge up. Once it's got a full charge, give it a test vape. If everything's working properly, you should be good to go!

But hey, if you're still having trouble, don't stress. Sometimes these things just need a little extra love. Just remember, patience is a virtue - especially when it comes to fixing your favorite vape pen!

And there you have it, folks! Your Suorin Air is as good as new. Happy vaping!