How To Clean Ijust 2 Tank

Alright, folks, let's talk about something that's as inevitable as your cat knocking over your plant again - cleaning your Ijust 2 tank. Now, I know what you're thinking, "But I just filled it up yesterday!" or "But it's not even dirty yet!" Well, my friend, let me tell you, time flies when you're vaping, and before you know it, your tank is looking like the bottom of your teenager's room - a mess you can't ignore.

First Things First: Gather Your Troops

Before you dive into this adventure, you'll need to round up your cleaning crew. You'll need some cotton swabs, a bowl of warm water, some dish soap (yes, the kind you use to wash your dishes), and a few paper towels. Oh, and don't forget your Ijust 2 tank, of course. It's like a treasure hunt, but with less pirate booty and more... well, less pirate booty.

Disassembly: The 'I Don't Even Know What This Is' Stage

Alright, now that you've got your supplies, it's time to take your tank apart. Don't worry, it's like putting together a puzzle, but in reverse, and without the satisfaction of seeing the picture at the end. Start by unscrewing the tank from the mod. Then, take off the drip tip and the top cap. You should now have the glass tank section and the base with the coil in your hands. It's like holding a tiny, clear, vaping version of the Earth - except this one isn't supposed to be spherical.

Once you've got everything disassembled, take a good look at your coil. If it's looking a bit black and crusty, it's time for a replacement. Don't worry, it's not you, it's the coil. It's like that friend who always needs a ride home from the bar - eventually, you just have to cut them loose.

Cleaning: The 'Bubbles Are My Friends' Stage

Now that you've got your tank stripped down, it's time to give it a good cleaning. Fill your bowl with warm water and add a few drops of dish soap. The key here is to get it nice and soapy, like a tiny, vaping bathtub. Submerge your tank glass and the base (without the coil) in the soapy water. Let them soak for a few minutes while you do a little dance to pass the time. You know, something silly like the Macarena. No one's judging.

After your impromptu concert, grab your cotton swabs and give your tank a good scrub. Get in there and really clean those hard-to-reach places. It's like giving your tank a deep tissue massage, but with less oil and more bubbles. Once you're satisfied with your scrubbing, rinse everything off with warm water and pat it dry with a paper towel.

Reassembly: The 'I Hope I Put This Back Right' Stage

Alright, the hard part is over. Now it's time to put your tank back together. Start by screwing the base back onto the glass tank section. Then, pop your new coil into place. Remember, the coil goes in with the coil legs pointing down, like little metal feet. It's like putting on a pair of socks, but with less static cling and more vaping.

Chemical Tank Cleaning Procedure at Barbara Ridgley blog

Once your coil is in place, put the top cap back on, followed by the drip tip. Then, screw your tank back onto your mod. Voila! Your tank is as good as new, ready to vape again, and looking like it never even saw the inside of a bowl of soapy water. It's like giving your tank a fresh start, a new lease on life. Or, you know, just a good cleaning.

Prevention: The 'I Don't Want to Do This Again' Stage

Now that your tank is clean and ready to go, let's talk about how to keep it that way. The key here is to change your coil regularly. I know, I know, it's like I'm your mom telling you to clean your room, but hear me out. The longer you use a coil, the more gunk builds up, and the harder it is to clean. So, change your coil every week or two, and you'll find that your tank stays cleaner for longer.

Also, don't be afraid to give your tank a quick rinse every now and then. A little warm water and dish soap can go a long way in keeping your tank clean between deep cleans. It's like giving your tank a quick shower - it might not be a full-on bath, but it's enough to keep it fresh.

And there you have it, folks. Cleaning your Ijust 2 tank is as easy as 1, 2, 3 (or, you know, disassembly, cleaning, reassembly). So, the next time you find yourself staring at a dirty tank, don't despair. Just grab your dish soap and your cotton swabs, and you'll be vaping in no time. Happy cleaning!