How To Change Coil On Smok Procolor 225w

Hey there, vaping enthusiast! Today, we're going to tackle a task that might seem daunting at first, but I promise, it's as easy as pie. We're talking about changing the coil on your trusty Smok Procolor 225W. So, grab your tools and let's dive right in!

Gather Your Squad

First things first, make sure you've got all your gear ready. You'll need a new coil (duh!), a screwdriver ( Phillips head, size PH0 or PH1), and a pair of tweezers. Oh, and don't forget to have your Smok Procolor 225W itself. It's kinda important.

Say Bye-Bye to the Old Guy

Alright, let's get this show on the road. Start by unscrewing the tank from the mod. Give it a quarter turn counterclockwise and it should pop right off. Then, unscrew the base of the tank. You'll see that coil just chillin' there, ready for its eviction notice.

Now, here's where things get a tad bit tricky. You'll need to unscrew the coil from the base. It's a tight fit, so don't be afraid to put a little elbow grease into it. Just remember, we're not trying to unscrew our way into the sun, so go easy.

Once you've got that coil out, take a moment to appreciate its service. It's done its time, and now it's time for it to rest. Toss it in the trash (or recycling, if you're feeling eco-friendly) and let's move on to the main event.

Welcome the New Kid on the Block

Now that the old coil is out, it's time to introduce its replacement. Take your new coil and, using your tweezers, gently place it into the base of the tank. Make sure it's facing the right way - the coil head should be pointing down.

Next, screw the base back onto the tank. Don't go too crazy with the screwing, just a quarter turn should do the trick. Then, screw the tank back onto the mod. Again, just a quarter turn clockwise and you're golden.

Part 3 - SMOK MAG COIL swap/change - YouTube

Prime Time

Alright, we're almost done! Now it's time to prime that new coil. Drip some e-liquid onto the cotton at the top of the coil. You should see it soak in. Then, fill up your tank and let it sit for a few minutes to really soak in that goodness.

After that, you're ready to rock and roll! Take a few dry puffs to really saturate that coil, then vape away. Just remember, don't chain vape that baby too hard, you don't want to burn out that new coil.

And That's a Wrap!

And there you have it, folks! Changing a coil on your Smok Procolor 225W is as easy as 1, 2, 3. You're now a certified coil-changing pro. So go forth, vape happy, and remember, always keep your gear in tip-top shape.

Until next time, happy vaping!